Scientific Papers Publications
Subcategory - Biomass Utilization
Click the image to view and download.
Within Tree Variation of Lignin, Extractives, and Microfibril Angle Coupled With the Theoretical and Near-Infrared Modeling of Microfibril Angle
Maleated Polypropylene Film and Wood Fiber Handsheet Laminates
An Investigation of Factors
Affecting Wettability of Some Southern Hardwoods
The Swelling Response of Loblolly Pine (Pinus taeda) Juvenile Wood to Water Submersion
Quantitative Trait Inheritance in a Forty-Year-Old Longleaf Pine Partial Diallel Test
Wetting Behaviors of Phenol- and Urea-Formaldehyde Resins as Compatibilizers
Synthesis and Cure Kinetics of Liquefied Wood/Phenol/
Formaldehyde Resins
Efforts of Silvicultural Practice and Moisture Content on Loblolly Pine Veneer Mechanical Properties
Thermomechanical Pulp Fiber Surface Modification for Enhancing the Interfacial Adhesion With Polypropylene
The Application of Nirvana to Silvicultural Studies
Plasma Enhanced Modification of TMP Fiber and Its Effect on Tensile Strength of Wood Fiber/PP Composite
Heterogeneous Nucleation of a Semicrystalline Polymer on Fiber Surfaces
Thermosets as Compatibilizers at the Isotactic Polypropylene Film and Thermomechanical Pulp Fiber Interphase
Tracheid Length Prediction in Pinus Palustis by Means of Near Infrared Spectroscopy: The Influence of Age
Effects of a New Caul System on Strength and Stability of Structural Flakeboard
Potential of Two Processing Methods to Reduce Sweetgum and Sassafras Lumber Defects
Hydrothermal Processing of Biomass From Invasive Aquatic Plants
Mechanical Response of Longleaf Pine to Variation in Microfibril Angle, Chemistry-associated Wavelengths, Density, and Radial Position
Selected Physical and Mechanical Properties of Moso Bamboo (Phyllostachys pubescens)
Mechanical and Physical Properties of Agro-based Fiberboard
Characterization and Performance of Melamine Enhanced Urea Formaldehyde Resin for Bonding Southern Pine Particleboard
Multivariate Modeling of Density, Strength, and Stiffness From Near-infrared Spectra for Mature, Juvenile, and Pith Wood of Longleaf Pine (Pinus palustris)
Genetic Improvement of Fiber Length and Coarseness Based on Paper Product Performance and Material Variability – A Review
An Investigation of Selected Factors That Influence Hardwood Wettability
Effects of Steam Treatment on Bending Properties and Chemical Composition of Moso Bamboo (Phyllostachys pubescens)
Physical and Mechanical Properties of Flakeboard Reinforced With Bamboo Strips
Relationship of Species and Season to Sawmill By-product Production: A Case Study
Investigation of Bio-Composites Using Novolac Type Liquefied Wood Resin:Â Effects of Liquefaction and Fabrication Conditions
Properties of Bio-Based Medium-Density Fiberboard
Physical and Mechanical Properties of Bio-Composites from Wood Particles and Liquefied Wood Resin
Facile Fractionation of Bamboo Wood Toward Biomass Valorization by p-TsOH-Based Methanolysis Pretreatment
The Effects of Silvicultural Treatments on the Chemical Composition of Plantation-Grown Loblolly Pine Wood
Differences in Some Chemical Properties of Innerwood and Outerwood From Five Silviculturally Different Loblolly
Effect of Different Catalysts on Urea–Formaldehyde Resin Synthesis
Study of Moso Bamboo’s Permeability and Mechanical Properties
Immunolocalization of Endogenous Indole-3-Acetic Acid and Abscisic Acid in the Shoot Internodes of Fargesia yunnanensis Bamboo during Development
Analysis of Phyllostachys pubescens Bamboo Residues of Liquefaction: Chemical Components, Infrared Spectroscopy, and Thermogravimetry
Evaluation of the Performance of the Composite Bamboo/Epoxy Laminated Material for Wind Turbine Blades Technology
Development of Wood Fiber-Polypropylene Laminates With Layer-By-Layer Assembly of Kraft Pulp HandSheets and Polypropylene Films
Sorption, Shrinkage, and Fiber Saturation Point of Kempas (Koompassia Malaccensis)
Effect of Fabricated Density and Bamboo Species on Physical-Mechanical Properties of Bamboo Fiber Bundle Reinforced Composite
Ability of Near Infrared Spectroscopy to Monitor Air-Dry Density Distribution and Variation of Wood
Finite Element Analyses of Wood Laminated Composite Poles
Finite Element Modeling of Small-Scale Tapered Wood-Laminated Composite Poles With Biomimicry Features
Chinese Tallow Tree (Sapium Sebiferum) Utilization Characterization of Extractives and Cell-Wall Chemistries
From Hydrophilicity to Hydrophobicity:Â A Critical Review:Â Part I. Wettability and Surface Behavior
Mechanical and Physical Properties of Composite Panels Manufactured From Chinese Tallow Tree Furnish
Selected Physical and Mechanical Properties of Chinese Tree Juvenile Wood
Effects of Raw Materials on the Properties of Wood Fiber-Polyethylene Composites–Part 3: Effect of a Compatibilizer and Wood Adhesive on the Interfacial Adhesion of Wood/Plastic Composites
Calibration of Moisture Meters for Southern Hardwoods
Effect of Two Drying Schedules on Spruce Pine Lumber Defects
Technical Feasibility of Structural Flakeboard Made From Mixed Hardwoods and Cypress From Northern Florida
Â
Effect of Silvicultural Practice and Veneer Grade Layup on Some Mechanical Properties of Loblolly Pine LVL
Flake Orientation Effects on Physical and Mechanical Properties of Sweetgum Flakeboard
Effects of Silvicultural Practice and Veneer Layup on Some Mechanical Properties of Loblolly Pine Plywood
Near Infrared Spectroscopy in the Forest Products Industry
Effects of Recycled Fiber on the Properties of Fiberboard Panels
Effect of Wood Grain and Veneer, Side on Loblolly Pine Veneer Wettability
Composites From Southern Pine Juvenile Wood. Part 3. Juvenile and Mature Wood Furnish Mixtures
Veneer-Reinforced Particleboards for Exterior Structural Composition Board
Surface Properties of Pine Scrimber Panels With Varying Density
Utilization of Chinese Tallow Tree and Bagasse for Medium Density Fiberboard
Agricultural and Forest Residues Towards Renewable Chemicals and Materials Using Microwave Liquefaction
Wood Properties of Selected Lesser-Used Honduran Wood Species
The Response of Visible/Near Infrared Absorbance to Wood-Staining Fungi
Effect of Silvicultural Practice and Wood Type on Loblolly Pine Particleboard and Medium-Density Fiberboard Properties
Effect of Streaming and Hot-Water Soaking on the Movement in Hardwoods During Drying
Effect of Veneer Grade Layup on Bending Properties of Loblolly Pine LVL
Laminating Wood Fiber Mats Into a Densified Material With High Performance