by drtoddadmin | Feb 1, 2026 | Blog
Our society depends on wood for a variety of uses. As population increases, so does our need for wood. Steel, concrete and aluminum are some alternatives to treated wood in certain applications, but they have higher material costs, higher energy requirements in the...
by drtoddadmin | Feb 1, 2026 | Blog
End Coatings Are Not Paint End coatings are products that can stop or minimize end checking on logs and lumber. It is important to understand that end coatings cannot reverse checking that has already occurred. Most commercial end coatings consist of paraffin wax or...
by drtoddadmin | Feb 1, 2026 | Blog
Photo by Karelj Abstract – Chromated Copper Arsenate Treated Wood The effects of acid concentration, reaction time, and temperature in a microwave reactor on recovery of CCA-treated wood were evaluated. Extraction of copper, chromium, and arsenic metals from...
by drtoddadmin | Jan 30, 2026 | Blog
One of the most common questions I have been asked over the years is “Should I use nails or screws?” Nails and screws are the most common fasteners which are most commonly used for wood-based construction and general wood working projects. Most people are confused,...
by drtoddadmin | Jan 24, 2026 | Blog
Plywood is an engineered wood panel that is comprised of thin veneers of wood that are adhered with an adhesive. It is commercially produced in 4×8 ft sheets that are readily available at hardware and lumber stores. Plywood has been around for decades and most...
by drtoddadmin | Jan 22, 2026 | Blog
The agricultural and forest industries both produce residues or waste streams that have little or no economic value. The challenge that remains for agricultural and forestry residues is how to best utilize this material for maximum efficiency and economic profit. A...
Recent Comments